Car Tyres Condition…
Car tyres are built to provide thousands of mi./km of excellent service. For maximum benefit, tyres must be maintained properly and have a good car tyres condition in order to keep away from tyre damages that may result in removal from service before the tread is worn down to the minimum depth. It’s not practical to accurately predict the service life of any specific tire, since service conditions vary widely. But for utilizing the maximum yield, we should take care of it.
Here we listing some of the tips……
Maintain proper inflation pressure in your car tyres
Proper inflation pressure is necessary for giving you the best performance, safety, and fuel economy. Remember to frequently (at least once a month) check your car tyres condition (when they are cool) with an accurate tyre pressure gauge.
Maintain inflation pressure at the recommended level
The recommended level can be found in your vehicle’s owner’s manual. Maintaining proper inflation pressure is the most important thing you can do to help your tires last longer and stay durable.
Under inflation is the leading cause of irreparable tire damage and may result in severe cracking and subsequent air loss. It reduces load capacity, allows excessive sidewall flexing, and increases rolling resistance, resulting in heat and mechanical damage.
Over inflation increases stiffness that may cause an uncomfortable driving experience and generate unwanted vehicle vibration. It also increases the chances of impact damage.
Don’t spin your car tyres excessively
Avoid excessive tire spinning when your vehicle is stuck in snow, ice, mud or sand. This may cause tire overheating and irreparable damage. Use a gentle backward and forward rocking motion to free your vehicle. Never stand near or behind a tire spinning at high speeds, for example, while attempting to push a vehicle that’s stuck or when an on-car spin balance machine is in use.
Check your tyres for wear
Always remove tires from service when they reach 1.6mm remaining in thread depth. All new tires have tread wear indicators that appear as smooth banks in the tread grooves when they wear to 1.6mm level. Wet weather accidents may occur from skidding on bald or nearly bald tires. Excessively worn tires
Check your tyres for damage
Frequent (at least once a month) inspection of your tires for signs of damage and their general condition is important for safety. If you have any questions, have your professional team inspect them. Impacts, penetrations, cracks, knots, bulges, or air loss always require tire removal and expert inspection.
Proper car tyres condition and repair
Ensure that your tires are handled by expertise hands and never let any one to experiment on it.
Don’t attempt to mount your own tires
Serious injury may result from explosion of tire/rim assembly from improper mounting procedures. Remember to follow your tire manufacturer’s instructions and match tire diameter to rim diameter. Only specially trained persons should mount tires.
Don’t mix tire of different sizes and types on the same axle
Maintain vehicle suspension & wheel alignment, & balance & rotate your tyres
Lack of rotation, worn suspension parts, under inflation, over inflation, wheel imbalance, and misalignment can cause vibration or irregular tire wear. Rotate your tires according to your vehicle manufacturer’s recommendations or at maximum intervals of 6,000 mi./10,000 km.
Don’t overload your vehicle
Check your vehicle’s owner’s manual to determine the load limits. Overloading your vehicle places stress on your tires and other critical vehicle components. This can also cause poor handling, increased fuel consumption and may cause tire damage. Never fit your vehicle with new tires that have less load capacity than shown on the vehicle tire placard, and remember that optimum rim width is important for proper tire load distribution and function.
Before replacing your tires, always consult the vehicle’s manual and follow the vehicle manufacturer’s tire recommendations. Vehicle handling may be significantly affected by a change in type and size. When selecting tires that are different from the original equipment size, see a ‘professional installer’ to make sure that proper clearance, load-carrying capacity, and inflation pressure are ensured.Never exceed the maximum load capacity and inflation pressure listed on the sidewall of the tire. When replacing tires, you must maintain the outside diameter and load-carrying capacity of the original equipment tire. Inflation pressure may need to be adjusted to avoid overloading the tire. Consult the Tyre & Rim Association Load and Inflation Tables, for correct load and inflation information. You must make certain that the replacement tires have a load-carrying capacity equal to or greater than what the original equipment manufacturer specifies.
For proper car tyre conditions please visit our technicians at our website carmozo.com or you can download our android app available in play store. And if you really liked our services you can log on to facebook and like our official carmozo page and please share your experiences and feedbacks in the timeline section of the page with us so that we can provide the best services from our side every time.