If you press the clutch pedal down, you either hear a chirping sound or squealing sound. This may be an indication of a damaged pilot bushing or release beating. These two components, if worn out, can also give similar sounds. The other problems in association with this noise are old input shaft, improper installation of friction disc and old release fork. If you hear other noises such as growling, then also you have to become alert.
You can also experience problems in clutch release and it will affect your driving experience. You find the clutch does not become disengaged, the spinning of the disc will not be stopped, and you will not be able to get the car gear to normal from neutral. The gears may also experience grinding problems, if the car is put in gear mode and the result will be the stalling action if the car is rolled into a stop. If the clutch component does not unfasten from the flywheel, the main reasons could be either a leakage of air in hydraulic system or the mechanical linkage is improperly adjusted.
107 total views, 2 views today